Electrical Wiring Interconnect System (EWIS) Target Group 4 & 5 – Initial
Electrical Wiring Interconnect System (EWIS) Target Group 4 & 5 – Initial
EWIS4-5-I-EN
Electrical Wiring Interconnect System (EWIS) Target Group 4 & 5 – Initial
Aviation Accident Investigators have specifically cited the need for improved training of personnel to ensure adequate recognition and repair of potentially unsafe aircraft wiring conditions. This Online training will greatly enhance the awareness with regard to the importance of EWIS safety as concerns the overall safe operation of aeroplanes.
Duration: 5 hours
Program:
A – GENERAL ELECTRICAL WIRING INTERCONNECTION SYSTEM PRACTICES
1. Safety practices
2. Electrostatic discharge sensitive (ESDS) device handling and protection
7. LRU replacement general practices
C – INSPECTION
13. General visual inspection (GVI), detailed inspection (DET), special detailed inspection (SDI), and zonal inspection, and their criteria and standards
14. Human factors in inspection
15. Zonal areas of inspection
16. Wiring system damage
D – HOUSEKEEPING
17. Aeroplane external contamination sources
18. Aeroplane internal contamination sources
19. Other contamination sources
20. Contamination protection planning
21. Protection during aeroplane maintenance and repair
22. Cleaning processes
E – WIRE
27. Typical damage and areas found (aeroplane specific)
31. Electrical bonding and grounds
Target Group: The training program is aimed at the personnel who are not directly involved in the maintenance and inspection of EWIS, identified as (i.a.w. AMC 20-22): Target groups 4 & 5 - Personnel Performing General Maintenance/Inspections Not Involving Wire Maintenance and Personnel Performing Other Engineering or Planning Work on In-Service Aircraft
Validity: 2 years
Aviation Accident Investigators have specifically cited the need for improved training of personnel to ensure adequate recognition and repair of potentially unsafe aircraft wiring conditions. This Online training will greatly enhance the awareness with regard to the importance of EWIS safety as concerns the overall safe operation of aeroplanes.
Duration: 5 hours
Program:
A – GENERAL ELECTRICAL WIRING INTERCONNECTION SYSTEM PRACTICES
1. Safety practices
2. Electrostatic discharge sensitive (ESDS) device handling and protection
7. LRU replacement general practices
C – INSPECTION
13. General visual inspection (GVI), detailed inspection (DET), special detailed inspection (SDI), and zonal inspection, and their criteria and standards
14. Human factors in inspection
15. Zonal areas of inspection
16. Wiring system damage
D – HOUSEKEEPING
17. Aeroplane external contamination sources
18. Aeroplane internal contamination sources
19. Other contamination sources
20. Contamination protection planning
21. Protection during aeroplane maintenance and repair
22. Cleaning processes
E – WIRE
27. Typical damage and areas found (aeroplane specific)
31. Electrical bonding and grounds
Target Group: The training program is aimed at the personnel who are not directly involved in the maintenance and inspection of EWIS, identified as (i.a.w. AMC 20-22): Target groups 4 & 5 - Personnel Performing General Maintenance/Inspections Not Involving Wire Maintenance and Personnel Performing Other Engineering or Planning Work on In-Service Aircraft
Validity: 2 years
MCQ
A certificate will be issued at the end of the training course.